• If your Air Force 4 stops working, it may need a new fuse. Access the fuses by the on/off switch. Carefully pry the black plastic cover off with a flat screwdriver. When the cover is off, the fuse holder is RED. Carefully pry the fuse holder out a bit, using the screwdriver. Use your fingers, to remove the fuse holder from the machine. The fuses clip into both sides of the fuse holder. Gently remove the fuses and replace them with 15amp fuses. There are 2 fuses in the Air Force 4. Brody's has the 15-amp fuse in stock for the Air Force 4, but any hardware store or car maintenance shop will have 15-amp fuses.

- With four outlets, the Air Force 4 is unmatched in it’s speed and efficiency.

- You can use the inflation hose to inflate 16” balloons and larger in 1/3 of the time of other machines.

- You can use the inflation hose to curl a 260 easily and quickly.

- The Air Force 4 is capable of inflating ALL modeling balloons sized 260 and up.

- The Air Force 4 is capable of inflating every size round latex.

- It's not recommended for 160 balloons.

- The foot pedal allows hands-free operation.

- Use the foot pedal for momentary operation or move the switch to "on" for continual use.

- When inflating 5” balloons, be sure and use the extension covers on three of the outlets and leave one outlet open for air flow and pressure.